Scientific Molding Work Shop: Dalton, GA March 24-25, 2018

This page outlines the upcoming Scientific Molding workshop being held March 24-25, 2018  at CH3 Solutions (event sponsor) in Dalton, GA . The event is 2 full days, from 8AM to 4PM.

This is NOT class room training! Both days of training take place directly on the machine:

  • Process Development: Participants will be trained how to establish a new process using decoupled molding technique
  • Process Recording: Attendees will be shown how to record all scientific data that is specific to a process. This includes melt and mold temperature data, as well as turbulent flow-specific data
  • Process Monitoring & Control- Instruction will be given regarding monitoring and process control. Participants will learn what process control limits are flexible, and which need to be rigid to maintain the rigidity of the process…

Click HERE for full information and to REGISTER

15 Reasons Molders Fail at Scientific Molding

By Garrett MacKenzie

Rare is the occasion that you will find me writing an article in first person. However this article is best presented with analogies and 30 years past experience. Initially I covered 10 scenarios that occur which cause “scientific molding” based companies to fail in their utilization of the principles they attempt to practice. There were many more I could outline, but to prevent readers from sleeping through my soap box episode, I only gave 10 reasons. The article received huge response, and excellent feedback. In revisiting this article, I will revise the first ten and include another five.. bringing the total to 15….

Click HERE to read this article…